Versions & compatibility - Tripp Trapp® - Baby Set (WW excluding US/CA)
Tripp Trapp® Baby Set V0 (ca. 1972 - August 2009)
Special features:
- Wooden front rail with leather crotch strap.
- The leather crotch strap had to be pulled through the seat plate and then threaded through the wooden front rail.
- After attaching the leather crotch strap, the wooden front rail was positioned between the two slots in the legs, located between the two back laminates.
- No compatible Harness available during launch.
- A special high curved back version Tripp Trapp® Chair was piloted in Europe prior to 2003. This special version was then officially launched in UK and France to serve as a supportive backrest between 2003-2006.
- In 2006, a plastic backrest was launched for all markets as a running change to the Baby Set setup, effectively replacing the need for a supportive curved backrest for the special version sold in UK and France.
- This plastic backrest would also slot into the slots on the legs just behind the wooden front rail.
- The plastic backrest would attach to both back laminates using 2 hooks on the top and 2 hooks on the bottom back laminate.
Compatibility and incompatibility:
- Can be used with any Tripp Trapp® Chair made until October 2011.
- Can be used with the Stokke® Classic Cushion, Junior Cushion and Adult Cushion.
- Can be used with the Stokke® Harness versions V1, V2, V3.
- Cannot be used with the Stokke® Harness².
- Cannot be used with the Stokke® Tray.
- Cannot be used with the Stokke® Storage if the plastic backrest is in use.
Tripp Trapp® Baby Set V1 (September 2009 - October 2011)
Special features & change log:
- A fully plastic Baby Set has been introduced, including an updated plastic backrest and front rail.
- The plastic backrest would no longer slot into the two slots on the legs.
- Wooden front rail and leather crotch strap concept has been scrapped entirely.
Compatibility and incompatibility:
- Can be used with any Tripp Trapp® Chair made since May 2003, as long as it is not a special edition with the high curved Back which was most commonly sold in UK and France.
- Can be used with the Stokke® Classic Cushion, Junior Cushion and Adult Cushion.
- Can be used with the Stokke® Storage.
- Can be used with the Stokke® Harness versions V1, V2, V3.
- Cannot be used with the Stokke® Harness².
- Cannot be used with the Stokke® Tray.
Tripp Trapp® Baby Set V2 (November 2011 - April 2013)
Special features & change log:
- The curvature of the plastic front rail was changed by increasing the size of the curve, therefore allowing larger babies to be seated longer. Additionally, this allowed the newly launched Tray to be attached.
- The front rail piece where the Baby Set attaches between the back laminates of the chair has a V2 symbol. If there is no V-symbol, it means it is a V1.
Compatibility and incompatibility:
- Can be used with any Tripp Trapp® Chair made since May 2003, as long as it is not a special edition with the high curved Back which was most commonly sold in UK and France.
- Can be used with the Stokke® Classic Cushion, Junior Cushion and Adult Cushion.
- Can be used with the Stokke® Storage.
- Can be used with the Stokke® Harness versions V1, V2, V3.
- Cannot be used with the Stokke® Harness².
- Can be used with the Stokke® Tray.
Tripp Trapp® Baby Set V3 (May 2013 - March 2024)
Special features & change log:
- Small extra ribs were implemented to prevent incorrect and unsafe front rail assembly.
- The front rail piece where the Baby Set attaches between the back laminates of the chair has a V3 symbol.
Compatibility and incompatibility:
- Can be used with any Tripp Trapp® Chair made since May 2003, as long as it is not a special edition with the high curved Back which was most commonly sold in UK and France.
- Can be used with the Stokke® Classic Cushion, Junior Cushion and Adult Cushion.
- Can be used with the Stokke® Storage.
- Can be used with the Stokke® Harness versions V1, V2, V3.
- Cannot be used with the Stokke® Harness².
- Can be used with the Stokke® Tray.
Tripp Trapp® Baby Set² (April 2024 -)
Special features & change log:
- Instead of the backrest using 2 hooks on the top back laminate and 2 hooks on the bottom back laminate, two long hooks were implemented instead - one long hook latches onto the top back laminate and the other long hook latches onto the bottom back laminate.
- 2 storage slots for Allen keys were implemented onto the back of the backrest, so they can be safely stored while the Baby Set² is installed.
- Slots for the Harness² to attach directly to the Baby Set² were implemented, ensuring that you need the Baby Set² in order to use the Harness² in a safety-guided effort to prevent users attempting to use just the Harness² without any version Baby Set.
- The buckle design was changed into a one-click release, making it easier for parents to get their child out in case of emergency, though the Harness² itself has remained as a 5-point Harness.
- The front rail piece where the Baby Set attaches between the back laminates of the chair has a V2 symbol with model number 1055259.
Compatibility and incompatibility:
- Can be used with any Tripp Trapp® Chair made since May 2003, as long as it is not a special edition with the high curved Back which was most commonly sold in UK and France.
- Can be used with the Stokke® Classic Cushion, Junior Cushion and Adult Cushion.
- Can be used with the Stokke® Storage.
- Can be used with the Stokke® Harness².
- Can also / instead be used with the Stokke® Harness versions V1, V2, V3.
- Can be used with the Stokke® Tray.