Versions & compatibility - Tripp Trapp® - Extended Gliders
Tripp Trapp® Gliders White/Beige (until May 2013)
Special features:
- Color: White (or Beige)
- Interchangeable - no difference between Front & Rear Gliders.
Compatibility and incompatibility:
- Can be used on any chair produced until May 2013.
- Can also be used a Front Gliders on newer post-June 2013 chairs, but not as Rear Gliders.
- Can only work with the old Extended Gliders V1 - the existing regular Glider must be removed first from the back.
Tripp Trapp® Gliders Black (from June 2013)
Special features & change log:
- Colour: Black
- Separation between Front and Rear
- Front Glider design has remained the same as the white/beige Glider
- Rear Glider design is new
- The new Rear Glider allows for the newer Extended Gliders to be attached without having to remove and replace the old Glider
Compatibility and incompatibility:
- Front Glider: Can be used on any chair produced until May 2013.
- Rear Glider: Can only be used on chairs produced after June 2013.
- Can only work with the newer Extended Gliders V2 & V3. The black Rear Glider can remain attached to the chair, as the Extended Gliders V2 & V3 can simply slide onto the Rear Glider.
Tripp Trapp® Extended Gliders V1 (ca. 2008 - May 2013)
Special features:
- These Extended Gliders replace the regular Rear Gliders on older chairs produced before May 2013
- They come with regular Beige Gliders, which can be used if a decision is made to later remove the Extended Gliders and transition back to regular Gliders.
Compatibility and incompatibility:
- Can only be used with chairs that have serial numbers that are in the following numeric ranges:
- 30000000 - 32000000
- 40000000 - 42000000
- 50000000 - 52000000
- The chair must have been produced in or prior to May 2013.
Tripp Trapp® Extended Gliders V2 (June 2013 - October 2018)
Special features & change log:
- The old design which required you to remove the regular Gliders and screw something into the chair was discontinued.
- The new design allows you to slip Extended Gliders onto the Rear Glider, allowing for easy assembly and easy removal.
Compatibility and incompatibility:
- Can be slipped on to any Rear Gliders on chairs produced after June 2013.
Tripp Trapp® Extended Gliders V3 (November 2018 -)
Special features & change log:
- The design changed slightly, giving some volume and height to these parts, making them feel more secure and sturdy.
Compatibility and incompatibility:
- Can be slipped on to any Rear Gliders on chairs produced after June 2013.
Tripp Trapp® Front Extended Gliders (November 2018 - November 2021; US/CA only)
Special features:
- The Front Extended Gliders were an additional set that could be attached to the front of the chair for added stability to further prevent potential forwarding-tipping - they were only included with the purchase of the Newborn Set in US and Canada.
- These were only available for a certain time while certain local regulatory requirements and US and Canada were active.
Compatibility and incompatibility:
- Compatible with any chair.